Table of Contents
Advertisement
Cable routing for the RAID adapter and drives
Read this section to learn about cable routing for the RAID adapter and drives.
RAID adapter cable
The break lines indicate that part of the cable is hidden in the illustration.
Figure 17. Mini SAS HD to 4 SATA 7-pin cable
Table 15. Mini SAS HD to 4 SATA 7-pin cable
Connector for the RAID adapter (connector C0). See
1
"RAID adapters" on page
Cable routing for three drives with the RAID adapter
Note: The RAID adapter should be installed in PCIe slot 1.
Figure 18. Cable routing for three drives with the RAID adapter
Table 16. Cable routing for three drives with the RAID adapter
Cable
Mini SAS HD to 4 SATA
1
7-pin cable
19.
cable labeled as "0"
1a
Connectors for the drives
2
From
Bay 1 drive signal
connector
Chapter 2
To
C0 connector on the RAID
adapter
.
Server components
25
Advertisement
Table of Contents
