Cleaning The Density Sensor - Xerox 6250DP - Phaser Color Laser Printer Reference Manual

Cleaning the Density Sensor

The printer has stopped printing because the density sensor is dirty. To clean it:
1.
Push up the latch on the front of the printer to open Front Door A.
2. Remove the transfer roller. Squeeze together the orange tabs at both sides of the transfer
roller and gently lift it out of the printer.
Caution
Avoid touching the surface of the roller.
Phaser® 6250 Color Laser Printer
4-21
Maintenance
6250-066
6200-023