Cleaning The Density Sensor - Xerox 6200DX - Phaser Color Laser Printer Troubleshooting Manual
Troubleshooting guide
Hide thumbs
Also See for 6200DX - Phaser Color Laser Printer:
- Network manual (50 pages) ,
- Setup and quick reference manual (49 pages) ,
- Paper manual (27 pages)
Table of Contents
Advertisement
Cleaning the density sensor
The printer stops printing when the density sensor is dirty. To clean the density sensor:
1.
Use the latch on the front of the printer to open Front Door A.
2.
Remove the transfer roller. Squeeze the orange tabs at both sides of the transfer roller and gently
lift it out of the printer.
3.
Use a dry towel or cotton swab to wipe the density sensor.
Phaser® 6200 Color Laser Printer
Regular Printer Maintenance
6200-66
6200-23
6200-12
15
Advertisement
Table of Contents
