Cleaning The Printer; Cleaning The Outside Of The Printer; Cleaning The Density Sensor - Xerox Phaser 6360 User Manual

Cleaning the Printer

This section includes:
■

Cleaning the Outside of the Printer

■

Cleaning the Density Sensor

For safety information, see
Cleaning the Outside of the Printer
To remove stains, clean the outside of the printer using a soft, damp cloth moistened with a
mild neutral detergent. Do not spray detergent directly onto the printer.
Warning:
To prevent electric shock, turn the printer off and unplug the power cord from the
electrical outlet before cleaning the printer.
Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.
Cleaning the Density Sensor
The printer displays a message when the density sensor needs cleaning. To clean the density
sensor:
1. Push up the latch on the front of the printer to open Front Door A.
on page 5-2
on page 5-2
User Safety on page A-1.
Phaser® 6360 Color Laser Printer
5-2
Cleaning the Printer
6360-046