Table of Contents
Advertisement
ID-3000 WORKSTATION VER 2.4
18. Fold the negative, moist side in, and dispose of it
properly.
Caution: The Polaroid instant film process uses a
caustic paste. Avoid contact with skin,
eyes and mouth and keep away from chil-
dren and animals. If you get some
paste on your skin, wipe it off immedi-
ately and wash with water to avoid an
alkali burn. If eye or mouth contact oc-
curs, quickly wash the area with plenty of
water and see a doctor. Keep discarded
materials away from children, animals,
clothing and furniture.
Note: For maximum tamper-resistance, the
print must be diecut and laminated
while it is still damp.
19. Insert the printed sheet into the die cutter.
Note: The diecutter shown is for systems that
print one ID card on each sheet of
film. If your system prints two ID
cards per sheet, your diecutter is
slightly different.
20. While holding the sheet in position, pull the die cutter
handle to trim the image.
21. Release the handle and remove the scrap from the
diecutter.
CARD ISSUE AND VERIFICATION
OPERATING INSTRUCTIONS
PAGE 83
36UPPER.EPS
Advertisement
Table of Contents
