ID-3000 WORKSTATION VER 2.4
Startup and Shutdown
Starting the System
Note: If the ID-3000 components are plugged into a
power strip, use the power strip on/off switch
to turn on all the equipment simultaneously.
Then begin startup at step 2 on page 14.
1. Turn on the ID-3000 components as follows:
a. Turn on the power switch (A) on the
back of the film output unit.
b. If your system has the optional portrait
scanner, turn on the power switch on
the back of the scanner (B).
STARTUP AND SHUTDOWN
OPERATING INSTRUCTIONS
A
B
PAGE 13
FOSWIT.EPS
SCANSWIT.EPS