ID-3000 WORKSTATION VER 2.4
Capturing Images Only
Proceed as follows to capture and store an applicant's
portrait for making an identification card at a later time.
General steps for capturing images only
1. Select the portrait source (video portrait camera or por-
trait scanner), if it has changed since the previous
portrait was captured.
2. Enter or correct the applicant's data.
3. Capture and store the applicant's signature (only for
ID-3000 systems equipped for signature capture).
4. Capture and store the applicant's portrait.
CARD ISSUE AND VERIFICATION
OPERATING INSTRUCTIONS
PAGE 47