ID-3000 WORKSTATION VER 2.4
Film Output Unit Adjustments
The following output unit adjustments affect the appear-
ance of identification cards:
ID card tint
Card brightness
Portrait tint
Portrait brightness
Film timer settings
Procedures for making these adjustments are on the fol-
lowing pages.
Note: All these procedures start at the issue and ver-
ify menu.
Make a New ID Card
Capture Images Only
Enter Applicant Data Only
Verify Applicant
Reissue ID Card
Adjust System
If this menu is not on the screen, display it as de-
scribed on page 22 before proceeding.
OUTPUT UNIT ADJUSTMENTS
OPERATING INSTRUCTIONS
OUTPUT UNIT ADJUSTMENTS
PAGE 99
OPSMENU.EPS