ID-3000 WORKSTATION VER 2.4
Entering Applicant Data Only
Use the following procedure to enter or update an appli-
cant's data without capturing a portrait or a signature.
1. Select Enter Applicant Data Only from the is-
sue and verify menu.
If your system is set up for more than one applicant cate-
gory, the applicant category window opens.
Make a New ID Card
Capture Portrait and Signature
Enter Applicant Data Only
Verify Applicant
Reissue ID Card
Adjust System
This is a sample window; yours may be different.
If the applicant category window appears, go to step 2
on the next page.
CARD ISSUE AND VERIFICATION
OPERATING INSTRUCTIONS
Employees
Contractors
Visitors
VIEWSEL3.EPS
PAGE 63