Table of Contents
Advertisement
ID-3000 WORKSTATION VER 2.4
Cleaning the Developer Rollers
Dirt or dried developer on the developer rollers can
cause repeated spots on pictures, jammed film and
other problems. Inspect the rollers when loading film,
and clean them as follows if necessary.
1. With both hands, lift the steel loops and remove the
roller assembly.
2. Clean both rollers with a soft, lint-free cloth, dampened
with water if needed.
Or, hold the roller assembly under clean running water.
Rotate both rollers as you clean and inspect them.
(Note that one roller turns more easily than the
other.) Never scrape the rollers with anything metal-
lic, nor with your fingernail, and never attempt to dis-
assemble the rollers.
CLEANING DEVELOPER ROLLERS
OPERATING INSTRUCTIONS
CLEANING DEVELOPER ROLLERS
PAGE 141
OUTPT22B.EPS
OUTPT23B.EPS
Advertisement
Table of Contents
