OPERATING INSTRUCTIONS
No Yellow Tab
If a yellow tab does not appear outside the film holder af-
ter you pull out the white tab, do not pull another white
tab. Instead, carefully open the holder far enough to get
a finger on top of the film pack to hold it in position.
Grasp the topmost yellow tab, and gently pull it all the
way out and discard it.
Inspect the rollers and clean them if necessary (see
"Cleaning the Developer Rollers" on the next page).
Close and latch the door, with the next white tab sticking
out.
You must select Expose again to print an image on
film. The pull the white tab and the yellow tab as usual
to begin film processing.
PAGE 140
ID-3000 WORKSTATION VER 2.4
NO YELLOW TAB
NO YELLOW TAB
47UPPER.EPS
47LOWER.EPS