OPERATING INSTRUCTIONS
7. Carefully view the displayed portrait.
If the captured area is satisfactory, press the space bar
to return to the scanner adjustment menu. Then go
to step 8.
If the size or placement of the displayed portrait requires
adjustment, press the space bar to return to the
scanner adjustment menu. Then go back to step 4
of the capture area adjustment procedure (page
129).
8. Select Save and exit to save the new settings and
return to the system adjustment menu.
9. Press the Esc key to return to the main menu.
PAGE 134
PORTRAIT SCANNER ADJUSTMENT
ID-3000 WORKSTATION VER 2.4