Rack Stability; Getting Help; Technical Support - HP StorageWorks SAN Switch 2/32 Installation Manual

About this Guide

Rack Stability

WARNING: To reduce the risk of personal injury or damage to the equipment, be
sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• In single rack installations, the stabilizing feet are attached to the rack.
• In multiple rack installations, the racks are coupled.
• Only one rack component is extended at any time. A rack may become
unstable if more than one rack component is extended for any reason.

Getting Help

If you still have a question after reading this guide, contact service representatives or
visit our website.

Technical Support

There are no customer serviceable parts in the SAN Switch 2/32. For the most current
technical support information, visit the HP website at:
http://www.hp.com/support.
Be sure to have the following information available before requesting assistance:
• Technical support registration number (if applicable)
• Product serial numbers, please reference "Locating SAN Switch 2/32 Serial
Numbers," in Chapter 2
• Product model names and numbers
• Applicable error messages
• Operating system type and revision level
• Detailed, specific questions.
xii SAN switch 2/32 version 4.0.x installation guide