Setting The Port Status Detection Timer; Configuring Cpu Usage Monitoring; Setting Memory Thresholds - HP 5130 EI series Configuration Manual

Setting the port status detection timer

The device starts a port status detection timer when a port is shut down by a protocol. Once the detection
timer expires, the device brings up the port so the port status reflects the port's physical status.
To set the port status detection timer:
Step
1. Enter system view.
2. Set the port status detection
timer.

Configuring CPU usage monitoring

You can enable CPU usage monitoring so the system periodically samples and saves CPU usage. To
examine recent CPU usage, use the display cpu-usage history command.
You can also set CPU usage thresholds. When a CPU usage threshold is reached, the device sends a
trap.
To configure CPU usage monitoring:
Step
1. Enter system view.
Enable CPU usage
2.
monitoring.
3. Set the CPU usage sampling
interval.
4. Set CPU usage thresholds.

Setting memory thresholds

To ensure correct operation and improve memory utilization, the system monitors the memory usage and
the amount of free memory space in real time:
If the memory usage threshold is exceeded, the system generates and sends a trap.
•
If a free-memory threshold is exceeded, the system generates an alarm notification or an
•
alarm-removed notification and sends it to affected service modules or processes.
The device supports the following free-memory thresholds:
Normal state threshold.
Minor alarm threshold.
Severe alarm threshold.
Command
system-view
shutdown-interval time
Command
system-view
monitor cpu-usage enable [ slot
slot-number [ cpu cpu-number ] ]
monitor cpu-usage interval
interval-value [ slot slot-number
[ cpu cpu-number ] ]
monitor cpu-usage threshold
cpu-threshold [ slot slot-number
[ cpu cpu-number ] ]
122
Remarks
N/A
The default setting is 30 seconds.
Remarks
N/A
By default, CPU usage monitoring
is enabled.
By default, the CPU usage
sampling interval is 1 minute.
By default, the CPU usage
threshold is 99%.