Display Transceiver Manuinfo - HP 6125G Command Reference Manual

36
Table 28 Command output
Field
transceiver diagnostic information
Current diagnostic parameters
Temp.(°C)
Voltage(V)
Bias(mA)
RX power(dBm)
TX power(dBm)

display transceiver manuinfo

Syntax
display transceiver manuinfo interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays the electronic label data for the transceiver module
in the specified interface. The interface-type interface-number argument specifies an interface by its type
and number. If no interface is specified, the command displays the electronic label data for all
transceiver modules.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display transceiver manuinfo to display the electronic label data for transceiver modules.
3.31 6.13 -35.64 -5.19
Description
Digital diagnosis parameters of the transceiver module in
the interface.
Current diagnostic parameters.
Digital diagnosis parameter-temperature, in °C, with the
precision to 1°C.
Digital diagnosis parameter-voltage, in V, with the
precision to 0.01 V.
Digital diagnosis parameter-bias current, in mA, with the
precision to 0.01 mA.
Digital diagnosis parameter-RX power, in dBm, with the
precision to 0.01 dBm.
Digital diagnosis parameter-TX power, in dBm, with the
precision to 0.01 dBm.
150