Display Transceiver Alarm - HP 6125XLG Command Reference Manual

Blade
Table of Contents

Advertisement

Syntax
display system-working-mode
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the current system working mode.
<Sysname> display system-working-mode
The current system working mode is standard.
The next system working mode is advance.

display transceiver alarm

Use display transceiver alarm to display transceiver alarms.
Syntax
display transceiver alarm interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface
is specified, this command displays the alarms present on every transceiver module.
Usage guidelines
Table 36
shows the common transceiver alarms. If no error occurs, "None" is displayed.
Table 36 Common transceiver alarms
Field
SFP/SFP+:
RX loss of signal
RX power high
RX power low
TX fault
TX bias high
TX bias low
TX power high
Description
Signal loss occurred in the inbound direction.
The received optical power is high.
The received optical power is low.
Transmission error.
The transmitted bias current is high.
The transmitted bias current is low.
The transmitted optical power is high.
211

Advertisement

Table of Contents
loading

Table of Contents