Language Selection; Emergency Language Reset - Newport MM4006 Manual

MM4006
2.2.1.1
H O M E
2.2.1.2
EDH0181En1020 — 03/03
Pressing the
tion of the currently displayed parameter. If the value needed is provided
from a short list, the new menu looks like this:
The
CHANGE
recording any modification and
(level) but the displayed value is stored as the new entry for the selected
parameter.
If a parameter requires a numerical value, the menu level that allows modi-
fications will have the following choices:
The numerical value displayed will have a
numerical entry from the keypad is expected. For simple editing, pressing
the
DELETE
key accepts the value for the selected parameter and returns to the previ-
ous menu. The
any modifications.
This manual contains detailed descriptions, mostly with the first time
reader in mind. To help the more experienced user looking for a quick
memory refresher, each operation description is also accompanied by a
quick front panel key sequence and, if appropriate, the remote command
that accomplishes the same function.

Language Selection

The first parameter displayed from the General Setup list is the display lan-
guage. This sets the language the controller uses to communicate with the
operator, especially through the front panel.
The MM4006 can use two languages at this time: English and French. To
change the language, from the display shown in Fig. 2.5 press the
key. The new menu displayed is
Press the
VALID
display will now use the new selected language.
JOG
AXES
1 2 3
1/5
SETUP
4 5 6
1 : - 3 . 3 5 6 m m
2 : 1 2 . 3 4 5 2/6 D e g
3 : 2 . 3 4 5 6 m m
7 8 9
4 : U n c o n n e c t e d
3/7
S e l e c t a c t i o n
- 0 .
M A N U A L M O V E P R O G .
4/8

Emergency Language Reset

In case the controller has been set to operate in a language you do not
understand, use the following procedure to reset the controller:
1 Assume the following labeling convention for the function keys:
key enters a lower level menu that allows modifica-
MODIFY
CHANGE
key scrolls through the list,
DELETE
key erases the last digit of the numerical entry. The
key returns to the previous menu without keeping
QUIT
CHANGE
key until the desired language is displayed. Press the
CHANGE
key to accept the selection and return to the previous menu. The
→ → →
GEN. MODIFY
1 2
2.8
QUIT VALID
exits this level without
QUIT
also returns to the previous screen
VALID
QUIT VALID
sign in front, indicating that a
NOTE
QUIT VALID
→ →
CHANGE VALID QUIT
3 4
Local Mode
VALID
MODIFY
→
QUIT