Cleaning - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N

6.1 Cleaning

Clean the parts listed in the table below according to the printer condition.
Unit Cleaning point
Main unit Printer exterior surface
PH window
Transfer belt
Registration roller
Area around the waste toner
collecting port
Feed roller (Standard cassette (C1))
Separation roller (Standard cassette
(C1))
Feed roller (MP tray)
Separation roller (MP tray)
Optional Feed roller
cassette unit
Separation roller
Transport roller
Duplex unit Transport roller
Ventilation Section
Make sure to turn the power switch OFF and unplug the power
code before cleaning to avoid electric shock, burn or any other
injuries.
MAINTENANCE
Downloaded from www.Manualslib.com
Table 6-1. Cleaning
Cleaning Requirements
When the exterior is stained (dirty or
dusty).
When white streaks (missing areas)
appear on the printing result.
When image quality problems such
as bands, unevenness or smudges
occur.
When the Registration roller is dirty
and it affects the image.
When area around the waste toner
collector is stained with toner.
When malfunctions in paper feeding
such as multiple-sheet feed, non-
feed, or skew occur frequently.
When the Ventilation Section is dirty.
manuals search engine
Do not use alcohol, thinner, or any other solvents. When using
these ones, follow the instructions of the procedures.
Be extremely careful not to make the internal parts of the
printer get wet.
A hard brush or cloth can scratch the product. Do not use them
to wipe the product.
MAIN UNIT
Printer exterior surface
Wipe the surface clean with a cloth wrung out of water.
Figure 6-1. Cleaning the Printer Surface
Cleaning
Revision D
332
Confidential