Epson AcuLaser C9200N Service Manual page 178

EPSON AcuLaser C9200N
B2
C2 D2
Don't burn the Photoconductor Unit. Toner remnants may spatter and cause fire. And
It may result in burns.
1. Open the Front Door.
2. Push down the protrusion of the Photoconductor Unit to be replaced, and slowly pull it
toward.
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Photoconductor Unit
Main Unit Disassembly/Reassembly
manuals search engine
B3
C3 D3
Don't burn the used Waste Toner Collector. Toner may spatter and cause fire. And It
may result in burns.
The Exhaust Filter is supplied with the Waste Toner Collector. Replace it when
C H E C K
P O I N T
replacing the Waste Toner Collector.
1. Open the Front Door.
2. Push the unlocking knob in the printer side. And then, pull out the Waste Toner Collector
which popped up from the printer.
Revision D
Waste Toner Collector + Exhaust Filter
Confidential
178