Epson AcuLaser C9200N Service Manual page 114

EPSON AcuLaser C9200N
E200: TRANSFER BELT SEPARATION
1st Image Transfer Pressure/Retraction
Position Sensor (PC6)
1st Image Transfer Pressure/Retraction
Clutch (CL3)
Step Action
1 Check the M1 connector for proper
connection and correct as necessary.
2 PC6 I/O check, Sensor check
3 CL3 operation check
4 M1 operation check
5 Change PWB-M (p.198)
Troubleshooting
Downloaded from www.Manualslib.com
Relevant Electrical Parts
Main Motor (M1)
Mechanical Control Board (PWB-M)
Connection Diagram
Control Signal
---
---
PWB-M CNDM1-11 (ON)
PWB-M CNDM1-5 (REM)
PWB-M CNDM1-8 (LOCK)
---
manuals search engine
E210: 2ND TRANSFER ROLLER SEPARATION
Mechanical Control Board (PWB-M)
Step
1 Check the connector of motor for
Location
proper connection and correct as
(electrical parts)
necessary.
---
2 Change Right Door
3 Change PWB-M
---
K to L-2
K to L-2
E220: TRANSFER BELT UNIT NEW ARTICLE RELEASE
---
Mechanical Control Board (PWB-M)
Step
1 Reinstall the Unit.
2 Change PWB-M
Service Call Error
Relevant Electrical Parts
Right Door
Connection Diagram
Action
Control Signal
---
(p.260) ---
(p.198) ---
Relevant Electrical Parts
Connection Diagram
Action
Control Signal
---
(p.198) ---
Revision D
Location
(electrical parts)
---
---
---
Location
(electrical parts)
---
---
114
Confidential