Epson AcuLaser C9200N Service Manual page 263

EPSON AcuLaser C9200N
Terminal end position
Make sure following things when installing the High Voltage Unit (HV1).
Terminal end surely contacts (Refer to Figure 1).
Tab [5] surely set up (Refer to Figure 2).
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Figure 1
Figure 2
4038F2C087DA
Main Unit Disassembly/Reassembly
manuals search engine
M Mark
P Mark
Be cautious not to install the wrong Screw because two types of Screws [2] are
used.
• M Mark: Screws for installing metallic parts (Space between thread is small).
• P Mark: Screws for installing plastic parts (Space between thread is large).
Revision D
263
Confidential