Epson AcuLaser C9200N Service Manual page 166

EPSON AcuLaser C9200N
Don't burn the Photoconductor Unit. Toner remnants may spatter and cause fire. And
It may result in burns.
1. Open the Front Door.
2. Push down the protrusion of the Photoconductor Unit to be replaced, and slowly pull it
toward.
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
C1
Photoconductor Unit
Main Unit Disassembly/Reassembly
manuals search engine
D1
[2]
Before replacing the Fusing Unit, ensure that it has had time to cool down.
1. Turn OFF the Main Power Switch and unplug the power cord from the power outlet, then
wait for about 20 minutes.
2. Open the Front Door.
3. Remove two Claws [1], and remove the Exit Tray Connector protective cover [2].
4. Disconnect the Connector [3].
Revision D
Fusing Unit
[1]
[3] 4039F2C010DA
4039F2C011DA
166
Confidential