Epson AcuLaser C9200N Service Manual page 64

EPSON AcuLaser C9200N
2.2.10.2 Drive
Cleaning Blade
Transfer Belt Toner
Collecting Screw
Figure 2-45. Drive overview
OPERATING PRINCIPLES
Downloaded from www.Manualslib.com
Main Motor (M1)
PU Toner Collecting Screw
4038T2C025DA
Operating Principle of Main Unit Mechanism
manuals search engine
2.2.10.3 Operation
TONER COLLECTING MECHANISM
Toner collected by the Cleaning Blade of the Transfer Belt and waste toner in
each of the Photoconductor Units are conveyed by the corresponding Toner
Collecting Screws to the Waste Toner Collector.
Waste Toner Collector
Figure 2-46. Toner collecting mechanism
WASTE TONER COLLECTOR SET DETECTION
The Waste Toner Full Detection Signal on the Water Toner Full Sensor
(PC8) detects Set/Unset of the Waste Toner Collector.
Set/Unset of the Waste Toner Collector is detected when the front door is
closed with the Main Power Switch being ON. The printing will stop when
the Waste Toner Collector is not set.
Revision D
PU Toner Collecting Screw
Transfer Belt Toner
Collecting Screw
4038T2C023DA
Confidential
64