Epson AcuLaser C9200N Service Manual page 196

EPSON AcuLaser C9200N
C4 D4
1. Remove four Screws [1].
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Upper Cover + Control Panel
[1]
Main Unit Disassembly/Reassembly
manuals search engine
[1]
[5]
2. Remove the Ground terminal [2].
3. Remove the Connector [3], then remove the Upper Cover [4].
4. Remove five Screws [5], then remove the Control Panel [6].
Be careful when removing the Ground terminal because the edge of the Faston
terminal is sharp. Make sure to work with gloves on to avoid getting injured.
[3] [2] [4]
[5]
Revision D
196
Confidential