Epson AcuLaser C9200N Service Manual page 217

EPSON AcuLaser C9200N
[3]
2. Remove the Shoulder Screw [3] and the Screw [4].
3. Remove the Vertical Transport Assy [5] as shown in the figure above.
Since multiple Connectors [6] are connected to the backside of the Vertical Transport
Assy, do not pull it by force.
4. Remove two Connectors [6] of the backside of the Vertical Transport Assy.
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
[5]
[4]
[6]
Main Unit Disassembly/Reassembly
manuals search engine
[8]
[9]
[12]
[11]
5. Remove two Claws [7] of both sides, and remove the Sensor cover [8].
Use care not to miss the spring [9].
6. Remove two Screws [10] and the Connector [11], and then remove the IDC sensor/1 (front
side) [12].
Revision D
[7]
4038F2C171DA
[10]
217
Confidential