Epson AcuLaser C9200N Service Manual page 164

EPSON AcuLaser C9200N
A1
[4]
1. Open the Front Door.
2. Remove the Screw [1] each to remove the Right and Left Stoppers [2].
3. Pull out the Right and Left Pins [3] to remove the Front Door [4].
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Front Door
[2]
[1]
4038F2C038DB
[3]
4038F2C039DA
manuals search engine
[1]
The Transfer Belt Unit is included in "Transfer Kit" as a service part. Additionally, the
C H E C K
P O I N T
2nd Image Transfer Roller, Ozone filter, and Dust Filter are also included in "Transfer
Kit". Replace them at the same time. Refer to
"MAINTENANCE") (p331))
After the Transfer Belt Unit has been removed from the Main Unit for other purposes
than replacement, make sure to put it in the shipping plastic sheet whose color is
black, or wrap it in the light shielding cloth and store it in a dark place.
1. Open the Right Door.
2. Remove two Screws [1] and release the Lock of the Transfer Belt Unit [2].
Main Unit Disassembly/Reassembly
B1
Transfer Belt Unit
[2]
4039F2C005DA
(Refer to Chapter 6
Revision D
164
Confidential