Correct Time Using Time Setting; Replace Photocon Uuuu *3 - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N
Table 1-8. Warning Message and Troubleshooting
Message
The printer has not been turned on
for 10 days or longer and the
Correct time using
capacitor has been
Time Setting
discharged.
The photoconductor unit for the
specified color has reached its
lifetime when it has been
continuously used after the
Replace Photocon uuuu
"Replace Photocon uuuu" error.
The print quality is not guaranteed
while this message is being
displayed.
Message warning that remaining
uuuu Toner Low
toner is low for the specified color.
Message warning that the
Photocon uuuu Needed photoconductor unit of the
Soon specified color is approaching the
end of its lifetime.
PRODUCT DESCRIPTION
Downloaded from www.Manualslib.com
Explanation Remedy
Set the date and time again
from Time Setting. This
warning recurs until they are
set again.
Replace with a new
photoconductor unit of the
specified color.
This message is cancelled
by one of the following.
Executing Clear All
Warnings in the Reset
Menu.
Executing Reset in the
Reset Menu.
This message is cancelled by
one of the following.
Executing Clear All
Warnings in the Reset
Menu.
Executing Reset in the
Reset Menu.
Replace with a new toner
cartridge of the specified
color.
This message is cancelled by
one of the following.
Executing Clear All
Warnings in the Reset
Menu.
Executing Reset in the
Reset Menu.
Replace with a new
photoconductor unit of the
specified color.
manuals search engine
Table 1-8. Warning Message and Troubleshooting
Message
Waste Toner Box Near
Full
Replace Fuser
Replace Transfer Unit
Replace Maintenance
Unit
List of Printer Messages
Explanation
This message is cancelled by
one of the following.
Executing Clear All
Message warning that the waste Warnings in the Reset
toner box is approaching the end of Menu.
its lifetime.
Executing Reset in the
Reset Menu.
Replacing the waste toner
box with a new one.
This message is cancelled by
one of the following.
Message warning that the fuser
unit has reached the end of its Executing Clear All
lifetime when it has been Warnings in the Reset
continuously used after the Menu.
"Replace Fuser" error. The print
Executing Reset in the
quality is not guaranteed while this
Reset Menu.
message is being displayed.
Replacing the fuser unit
with a new one.
This message is cancelled by
Message warning that the transfer
one of the following.
unit has reached the end of its
Executing Clear All
lifetime when it has been
Warnings in the Reset
continuously used after the
Menu.
"Replace Transfer Unit" error. The
Executing Reset in the
print quality is not guaranteed
Reset Menu.
while this message is being
Replacing the transfer unit
displayed.
with a new one.
This message is cancelled by
Message warning that the
one of the following.
maintenance unit has reached its
Executing Clear All
lifetime when it has been
Warnings in the Reset
continuously used after the
Menu.
"Replace Maintenance Unit" error.
Executing Reset in the
The print quality is not guaranteed
Reset Menu.
while this message is being
Replacing the maintenance
displayed.
unit with a new one.
Revision D
Remedy
29
Confidential