Epson AcuLaser C9200N Service Manual page 202

EPSON AcuLaser C9200N Revision D
B4
[5]
Controller Board Mounting Bracket
C4
[1]
[2]
[2]
[6]
[8]
[4]
[3]
[7]
3. Remove two Screws [5], and remove the Exit Sensor Holder [6].
4. Remove three Screws [7], and remove the Exit Tray [8].
1. Remove three Wire Saddles [1], six Screws [6], and four Clamp Cores [3], then remove the
Flat Cable Cover.
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 202
Confidential
Downloaded from www.Manualslib.com manuals search engine