Epson AcuLaser C9200N Service Manual page 244

EPSON AcuLaser C9200N Revision D
1st Image Transfer Pressure/Retraction Clutch (CL3)
D11
[1]
[4]
[2]
[6] [5]
[3] 3. Remove two Screws [4], three E-rings [5] and remove Install Board [6].
1. Remove two Screws [1] from the Fusing Drive Assy and remove the Fusing Drive Motor
[2].
2. Remove the E-ring [3].
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 244
Confidential
Downloaded from www.Manualslib.com manuals search engine