Epson AcuLaser C9200N Service Manual page 172

EPSON AcuLaser C9200N
The dust filter is included in the Transfer unit, and the filter should be replaced with
C H E C K
P O I N T
other parts in the Transfer unit at the same time.
IF the Duplex unit is mounted, remove it.
1. Remove the Dust Filter [1].
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
C1
Dust Filter
Main Unit Disassembly/Reassembly
manuals search engine
D1
[1]
[3]
The separation roller should be replaced, whenever the feed roller is replaced.
C H E C K
P O I N T
1. Slide out the standard paper cassette.
2. Lock the paper lifting plate [1] into position.
3. Snap off the C-clip [2] from the feed roller assy [3].
4. Remove the shaft for the feed roller assy [3] from the front bushing.
Revision D
Feed Roller (Standard Cassette)
[2]
[1]
172
Confidential