EPSON AcuLaser C9200N
Matched
Insert the Transfer Belt Unit into the Main Unit completely and make sure the
Drive Gear of the Transfer Belt Unit matches with that of the Main Unit. And then,
secure them with Screws. If they are secured even though both Drive Gears have
not been matched, the Main Unit may be damaged when closing the cover.
DISASSEMBLY AND ASSEMBLY
Downloaded from
www.Manualslib.com
Not Matched
Main Unit Disassembly/Reassembly
manuals search engine
C4
[2]
1. Remove the Screw [1], and remove the Plate Spring [2].
Revision D
IDC Sensor/1 (SE1) + IDC Sensor/2 (SE2)
[1]
4038F2C169DA
216
Confidential