Epson AcuLaser C9200N Service Manual page 185

EPSON AcuLaser C9200N
Matched
Insert the Transfer Belt Unit into the Main Unit completely and make sure the
Drive Gear of the Transfer Belt Unit matches with that of the Main Unit. And then,
secure them with Screws. If they are secured even though both Drive Gears have
not been matched, the Main Unit may be damaged when closing the cover.
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Not Matched
Main Unit Disassembly/Reassembly
manuals search engine
C10
[1]
1. Pull out the Paper Cassette 1.
2. Remove two Screws [1], and remove the Front Right Cover [2].
Revision D
PH Interface Board (PWB-D)
[2]
4038F2C097DA
185
Confidential