Epson AcuLaser C9200N Service Manual page 220

EPSON AcuLaser C9200N
E3
[2]
[4]
The pickup roller should be replaced, whenever the separation roller is replaced.
C H E C K
P O I N T
1. Remove the Screw [1], and remove the Ground terminal [2].
2. Remove the Screw [3], and remove the separation roller assy [4].
DISASSEMBLY AND ASSEMBLY
Downloaded from www.Manualslib.com
Separation Roller (MP tray)
[1]
4038F2C009DA
[3]
4038F2C010DA
Main Unit Disassembly/Reassembly
manuals search engine
[7]
[5]
[8]
3. Snap off the C-clip [5], and remove the spring [6] and the guide plate [7]. Remove the
Separation Roller [8].
Revision D
[6]
4038F2C502DA
220
Confidential