Register A Home Url; To Start Up The Phone - NEC DT930 Series User Manual

1.
(6) Select a desired screen.
The default setting is
0
If Automatic is selected, this feature is
activated using the system data setting.

Register a Home URL

The screen display is not only set by the Home screen
settings, but the phone can also be set to access the
XML application right after start up by registering the
address information of the application as a Home URL.
This section explains how to display the menu screen
and an example of the screen display when the phone
starts.
The XML application also can be used to
register the Favorite screen as a shortcut of the
service. For registering a shortcut or using a
shortcut, refer to
Use the Shortcut.
In addition, shortcuts of the service can be used
when address information has been registered
as the service. For details, contact your
administrator.
Registering the home URL is performed during
the initial setting stage. For details, contact your
administrator.

To Start Up the Phone

The phone automatically accesses the Home URL and
displays the received XML application.
The following XML application image is an
example and depends on the application used.
0
Automatic.
To Register a Shortcut or To
Press the Menu button to display the menu screen.
The screen that is displayed as the portal icon at that
time is the XML application screen registered as the
Home URL.
"Portal" is usually displayed as an application
name registered by the external application.
When the home URL has been registered, the
home URL screen is displayed instead of the
favorite screen when local soft key 1 is pressed.
The favorite screen cannot be displayed.
When the Home URL is registered the following
occurs in Home settings:
Automatic settings
The screen obtained from the Home URL is
displayed.
Favorite Screen settings
The screen obtained from the Home URL is
displayed.
Call Screen settings
The call screen is displayed.
87