Wan Interface Setup - Ovislink OV804WV User Manual

The Quick Setup page mainly includes the following three
functions:


WAN interface setup


LAN interface setup

Wireless interface setup
Quick setup enables fast and accurate configuration of your
Internet connection and other important parameters. The
following sections describe these various configuration
parameters. Whether you configure these parameters or use
the default ones, click Next to enable your Internet connection.
When subscribing to a broadband service, you should be
aware of the method, by which you are connected to the
Internet. Your physical WAN device can be Ethernet, DSL, or
both. Technical information regarding the properties of your
Internet connection should be provided by your Internet service
provider (ISP). For example, your ISP should inform you
whether you are connected to the Internet using a static or
dynamic IP address, or which protocols such as PPPoA or
PPPoE, you are to use to communicate over the Internet.
4.2.1 WAN Interface Setup
During WAN interface setup, you can set up a PVC and its
properties:

VPI

VCI

QoS

Internet Connection Type

Encapsulation Mode

IGMP Service

NAT
4.2.1.1 Setting up VPI/VCI and QoS
After logging in to the DSL router, if no PVC is configured
previously and no default settings exist, the Quick Setup page
appears. This page contains some basic configuration needed
22