Step 2 Select a service or enter a custom server.
Step 3 Set Server IP Address.
Step 4 Enter the server IP address of the computer that
provides the service (the server in the local host field).
Note that unless an additional external IP address is
added, only one LAN computer can be assigned to
provide a specific service or application.
Step 5 Set External Port Start and External Port End.
Step 6 Select Protocol.
Step 7 Set Internal Port Start and Internal Port End.
Step 8 Enter Remote IP.
Step 9 Click Save/Apply to apply the settings.
Figure 78 Adding virtual servers
99