Ovislink OV804WV User Manual page 168

Figure 135 Adopting radius server authentication topology

802.1x Authentication
Network Authentication: Set the authentication
–
mode for the selected wireless LAN of SSID to
802.1x.
Radius Server IP Adress: Enter the IP Address of
–
the authentication server.
Radius Port: Enter the port number of the
–
authentication server. The default port number is
1812.
Radius Key: Enter the same key as the Radius
–
server's.
– WEP Encryption: Enable WEP Encryption. This is
default
Encryption Strength: Set the desired data security
–
level to 64-bit or 128-bit.
Current Network Key: Select one of network key
–
that you set in Key fields as default one.
Network Key 1 to 4: Enter 5 ASCII characters or 10
–
hexadecimal digits for 64-bit encryption keys or enter
13 ASCII characters or 26 hexadecimal digits for
128-bit encryption key. The system allows you to
enter 4 kinds of WEP keys.
Click Save/Apply to save the wireless security options and
make the changes take effect.
164