WEP Encryption: Enable WEP encryption.
–
Encryption Strength: Set the desired data security
–
level as 64-bit.
Current Network Key: Select one of network keys
–
that you set in the Key fields as default one.
Network Key 1 to 4: Enter 5 ASCII characters or 10
–
hexadecimal digits for 64-bit encryption keys. The
system allows you to enter 4 kinds of WEP keys.
Click Save/Apply to save the wireless security options and
make the changes take effect.
Figure 133 Wireless – security (64-bit WEP)
128-bit WEP
Network Authentication: select the authentication
–
mode for the selected wireless LAN of SSID to be
open or shared.
WEP Encryption: enable WEP encryption.
–
Encryption Strength: set the desired data security
–
level as 128-bit.
Current Network Key: select one of network keys
–
that you set in Key fields as default one.
Network Key 1 to 4: enter 13 ASCII characters or 26
–
hexadecimal digits for 128-bit encryption keys. The
system allows you to enter 4 kinds of WEP keys.
162