according to wireless clients.
Click Save/Apply to save the wireless security options and
make the changes take effect.
Figure 138 Wireless-security (WPA2 authentication)
Mixed WPA2/WPA Authentication: this authentication
mode means AP auto adjust to use WPA2 or WPA
according to wireless clients.
Network Authentication: Set the authentication
–
mode for the selected wireless LAN of SSID to Mixed
WPA2/WPA.
WPA2
–
Disenable.
Network Re-auth Interval: Specify the timer of
–
re-authentication between the server and the client.
WPA Group Rekey Interval: Specify the timer the
–
WPA key must change. If the value is set to 0, there
is no need to change. The change is done
automatically between the server and the client.
Radius Server IP Adress: Enter the IP Address of
–
the authentication server.
Radius Port: Enter the port number of the
–
authentication server. The default port number is
1812.
Preauthentication:
167
Select
Enable
or