Ovislink OV804WV User Manual page 72

Setting Procedure
Step 1 Open the Internet browser and enter 192.168.1.1 in the
address bar to log in to the DSL Router.
Step 2 Select Advanced Setup > WAN and click Add.
Step 3 In the
and click Next.
Step 4 In the Connection Type page, select PPP over ATM
(PPPoA) and set the Encapsulation Mode to VC MUX,
and then click Next.
Step 5 In the PPP User name and Password page, enter the
user name and password provided by your ISP. Then,
click Next.
Step 6 In the Enable IGMP Multicast and WAN Service page,
keep the default settings and click Next.
Step 7 Confirm the network configuration and ensure that all
settings are consistent with the data provided by your
ISP. Then, click Save.
Step 8 Click Save/Reboot to apply the changes and reboot
the DSL Router.
4.4.1.6 Adding an MER PVC
This section describes the procedure for adding PVC 2/35
(MER mode).
Click Add and the following page appears.
ATM PVC Configuration
page, set VPI/VCI to 1/35
68