Ovislink OV804WV User Manual page 90

4.4.1.11 Bridge PVC Network Application
Description
In this example, the DSL Router is connected to the DSLAM
through PVC 4/35 and the access mode is pure Bridging. The
uplink interface of BRAS is encapsulated as 1483B, the IP
address is 10.28.108.1, and the IP address of the uplink
interface is 10.61.92.157. The PC attached to the DSL Router
is assigned with a public IP address and the gateway is
10.28.108.1.
Setting Procedure
Step 1 Open the Internet browser and enter 192.168.1.1 in the
address bar to log in to the DSL Router.
Step 2 Select Advanced Setup > WAN and click Add.
Step 3 In the
and click Next.
Step 4 In the Connection Type page, select Bridging and set
the Encapsulation Mode to LLC/SNAP-BRIDGING,
and then click Next.
Step 5 Deselect the check box below to disable this WAN
service page, keep the default settings and click Next.
Step 6 Confirm the network configuration and ensure that all
ATM PVC Configuration
page, set VPI/VCI to 4/35
86