Ovislink OV804WV User Manual page 73

Figure 53 PVC and its QoS configuration
In this page, you can modify VPI/VCI, service category and
QoS.
VPI (Virtual Path Identifier): the virtual path between two
points in an ATM network, and its valid value is from 0 to 255.
VCI (Virtual Channel Identifier): virtual channel between two
points in an ATM network. Its valid value range is from 32 to
65535 (1 to 31 are reserved for known protocols).
VLAN Mux: Config VlanID over a single pvc
Service Category: UBR Without PCR, UBR With PCR, CBR,
Non Realtime VBR and Realtime VBR.
Enable Quality Of Service: enable or disable QoS.
In this example, PVC 2/35 is to be modified and the default
values of service category and QoS remain. In actual
applications, you can modify them as required.
After proper modifications, click Next and the following page
appears.
In this page, you can modify the Internet connection type and
encapsulation mode.
69