Ovislink OV804WV User Manual page 59

preset minutes, if the DSL Router does not detect the flow of
the user continuously, the DSL Router automatically stops the
PPPoE connection. Once it detects the flow (like access to a
Web page), the DSL Router restarts the PPPoE dial-up.
If this function is disabled, the DSL Router performs PPPoE
dial-up all the time. The PPPoE connnection does not stop,
unless the DSL Router is powered off and DSLAM or uplink
equipment is abnormal.
PPP IP extension: if this function is enabled, the WAN IP
address obtained by the DSL Router through built-in dial-up
can be directly assigned to the PC being attached to the DSL
Router (at this time, the DSL Router connects to only one PC).
From the aspect of the PC user, the PC dials up to obtain an IP
address. But actually, the dial-up is done by the DSL Router.
If this function is disabled, the DSL Router itself obtains the
WAN IP address.
Use Static IP Address: if this function is disabled, the DSL
Router obtains an IP address assigned by an uplink equipment
such as BAS, through PPPoE dial-up.
If this function is enabled, the DSL Router uses this IP address
as the WAN IP address.
After entering the PPP user name and password, click Next
and the following page appears.
In this page, you can modify the service name, and enable or
disable the IGMP multicast and WAN service.
55