WPA key must change. If the value is set to 0, there
is no need to change. The change is done
automatically between the server and the client.
WPA Encryption: select TKIP, AES or TKIP + AES.
–
The TKIP is default. The TKIP + AES encryption
mode means AP auto adjust to use TKIP or AES
according to wireless clients.
Click Save/Apply to save the wireless security options and
make the changes take effect.
Figure 140 Wireless-security (WPA-PSK authentication)
WPA2-PSK Authentication
Network Authentication: set the authentication
–
mode for the selected wireless LAN of SSID to Mixed
WPA2-PSK.
WPA Pre-Shared Key: enter the pre-shared key for
–
WPA. Client stations must use the same key in order
to connect with this device. Check the table below for
instructions when entering the key.
Format
ASCII
Hexadecimal
Minimum characters
8
8
169
Maximum Characters
63
64