Ovislink OV804WV User Manual page 79

public address 10.28.108.* (2~254) dynamically assigned by
BRAS for accessing ISP.
The IP address of the PC can be fixed (as in this example) or
assigned through DHCP server of the DSL Router. If it is
assigned by the DHCP server, the DHCP functions of the DSL
Router must be enabled. The IP address of the DHCP address
pool is 192.168.1.* (2~254). The functions are enabled by
default and at the same time, the PC is configured to obtain IP
and DNS addresses dynamically.
Setting Procedure
Step 1 Open the Internet browser and enter 192.168.1.1 in the
address bar to log in to the DSL Router.
Step 2 Choose Advanced Setup > WAN and click Add.
Step 3 In the
and click Next.
Step 4 In
Encapsulation
Encapsulation Mode to LLC/SNAP-BRIDGING, and
then click Next.
Step 5 In the WAN IP Settings page, select Obtain an IP
address automatically, Obtain default gateway
automatically and Obtain a DNS server address
automatically. Then, click Next.
Note: You can manually configure the WAN IP address, default
gateway, and DNS server address.
Step 6 In the Network Address Translation Settings page,
enable the NAT and firewall. Keep default settings for
other fields. Then, click Next.
Step 7 Confirm the network configuration and ensure that all
settings are consistent with the data provided by your
ISP. Then, click Save.
Step 8 Click Save/Reboot to apply the changes and reboot
the DSL Router.
ATM PVC Configuration
the Connection
page, set VPI/VCI to 2/35
Type
Routing (MER)
75
page, select
and set
MAC
the