Ovislink OV804WV User Manual page 85

4.4.1.9 IPoA PVC Network Application
Description
In this example, the DSL Router is connected to the DSLAM
through PVC 3/35 and the access mode is the IPoA+NAT. The
downlink interface of BRAS is encapsulated in 1483R, the IP
address is 20.1.1.1, the IP address of the uplink interface is
10.61.92.157, and the WAN IP address of the DSL Router is
assigned as 20.1.1.2. The PC attached to the DSL Router is
assigned with a private IP address (within the same segment
as the management IP address 192.168.1.1) . The NAT
functions of the DSL Router is enabled, and the private address
of the PC is translated into the public address 20.1.1.* (2~254)
dynamically assigned by BRAS for accessing ISP.
The IP address of the PC can be fixed (as in this example) or
assigned through DHCP server of the DSL Router. If it is
assigned by DHCP server, the DHCP functions of the DSL
Router must be enabled. The IP address of the DHCP address
pool is 192.168.1.* (2~254). The functions are enabled by
default and at the same time, the PC is configured to obtain IP
and DNS addresses dynamically.
Setting Procedure
Step 1 Open the Internet browser and enter 192.168.1.1 in the
address bar to log in to the DSL Router.
Step 2 Select Advanced Setup > WAN and click Add.
81