Ovislink OV804WV User Manual page 62

Figure 45 PPPoE setup-completed
4.4.1.2 PPPoE PVC Network Application
Description
In this example, the DSL Router is connected to the DSLAM
through PVC 8/35 and the access mode is the built-in
PPPoE+NAT. The encapsulation of the BRAS downlink port is
PPP over Ethernet, the authentication is AUTO, the IP address
is 136.1.1.1, the IP pool is 136.1.1.*, and the IP address of
uplink port is 10.61.92.157. The IP of the WAN port on the DSL
Router is dynamically assigned by BRAS through the built-in
PPPoE dial-up. The PC attached to the DSL Router is assigned
with a private IP address (within the same segment as the
management IP of the DSL Router). The NAT function of the
DSL Router is enabled and the private address of the PC is
translated to the public address 136.1.1 .* (2~254) dynamically
assigned by BRAS for accessing ISP.
The IP address of the PC can be fixed (as in this example) or
assigned through DHCP server of the DSL Router. If it is
assigned by the DHCP server, the DHCP functions of the DSL
Router must be enabled. The IP address of the DHCP address
pool is 192.168.1.* (2~254). The functions are enabled by
default and at the same time the PC is configured to obtain IP
and DNS addresses dynamically.
58