Ovislink OV804WV User Manual page 177

Figure 143 Wireless-security (mixed WPA2/WPA authentication)

WPS Authentication: there are 2 primary methods used
in the Wi-Fi protected setup:
PIN entry: a mandatory method of setup for all WPS
–
certified devices.
Push button configuration (PBC): an actual push
–
button on the hardware or through a simulated push
button in the software. (This is an optional method on
wireless client).
If you are using the PIN method, you need a Registrar (access
point/wireless router) to initiate the registration between a new
device and an active access point/wireless router. (Note: The
PBC method may also need a Registrar when used in a special
case where the PIN is all zeros)
In order to use WPS authentication, you must ensure that
network card support the function. If it supports, you only need
to press the WPS button to enable it.
4.5.3.3 Wireless-MAC Filter
The Web page allows you to create a list of MAC addresses
that are banned or allowed association with the wireless
access point
173