Ovislink OV804WV User Manual page 183

countdown informing clients of the next page for listening
to broadcast and multicast messages.

Beacon Interval: a beacon is a packet of information that
is sent from a connected device to all other devices where
it announces its availability and readiness. A beacon
interval is a period of time (sent with the beacon) before
sending the beacon again. The beacon interval may be
adjusted in milliseconds. Default (100) is recommended.

XPress™ Technology: select Enable or Disable. This is
a special accelerating technology for IEEE802.11g. The
default is Disabled.

54g™ Mode: compatible with IEEE 802.11b, IEEE
802.11g. Select a standard from the drop-down list box. Its
default setting is 54g Auto. The drop-down list includes
following modes:
802.11b Only: only stations that are configured in
–
802.11b mode can associate. If you select it, the rate
of transmission only has selected values: 1 Mbps, 2
Mbps, 5.5 Mbps, and 11 Mbps. For other selections,
the rate of transmission has lots of selected values: 1
Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps,
12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54
Mbps.
54g LRS: this is a special compatibility mode for
–
802.11b/g and is in fact designed for older types of
b-clients. Use this mode if you are experiencing
problems with wireless clients that connect to the
OV804WV access point. If you select it, the preamble
type is disabled, which cannot be set.
54g Auto: only stations that are configured in
–
802.11b/g mode can associate.
54g Perfomance: only stations that are configured in
–
802.11g mode can associate. It is the same as 54g
LRS, if you select it, the preamble type is disabled,
which cannot be set.

54g™ Protection: the 802.11g standards provide a
179