Ovislink OV804WV User Manual page 111

Figure 85 Adding outgoing IP filtering

Filter Name: enter the name of outgoing filter rule.

Protocol: select one from TCP/UDP, TCP, UDP or ICMP
protocols.

Source IP address: enter an IP address. After you set the
IP address, outgoing packets (protocol selected packets)
are blocked.

Source Subnet Mask

Source Port: UPD/TCP source port or a range of ports.

Destination IP address: destination IP (default: null).

Destination Subnet Mask

Destination Port: UPD/TCP destination port or a range of
ports.

DSCP Mark
The following is an example of configuring the outgoing IP
filtering.
The topology is as follows:
107